Investment Jute Fiber as Environmental Waste to Reinforcement Polyester Resin, Epoxy Resin and its Mixtures Used in home applications

Alani, Rasha; Aljumaili, Aya; Alqaisi, Taha; Alani, Saad

doi:10.37652/juaps.2023.141991.1104

Document Type : Research Paper

Authors

¹ Department of Physics, College of Education for Pure Science, University of Anbar, Anbar, Iraq;

² Ministry of Education, Anbar Education Directorate, Anbar, Iraq;

https://doi.org/10.37652/juaps.2023.141991.1104

Abstract

In this paper , hand lay - up method was employed to prepare three models of polymeric materials and their compositions before and after reinforcement with different Volume fractions ( 0.5, 1, 1.5, 2, 2.5, 3 ) %. First group ( G1 ) consists of unsaturated polyester resin reinforced with Jute Fiber which that cut to length ( 5mm ) with Volume fraction that above - mentioned, and the second group ( G2 ) consists of Epoxy resin reinforced with the same fiber, as for the third group ( G3 ) ; consists of polymeric Blend ( 75% Epoxy + 25% Unsaturated polyester resin ) reinforced with the same fiber. Experimental results includes, Tests of Impact Strength and Thermal conductivity. For a different volume fractions of a samples ( all samples ) , the results showed that Impact strength increases with increasing volume fraction while thermal conductivity decreases by increase it.

Keywords

Main Subjects

Physics

References

[1] Hasan M., Khadiza T. K., Nazmol H. (2023). Sustainable ligand-modified based composite material for the selective and effective cadmium(II) capturing from wastewater. Journal of Molecular Liquids. 13(1) : 60-71. doi.org/10.1016/j. molliq. 2022.121125.

[2] Amna. S. Z., Khobab S. (2022). A review of joining techniques for thermoplastic composite materials. Journal of Thermoplastic Materials. 36(8) : 20-23. doi.org/10.1177/08927057221096662.

[3] Muhammad S., Azwar H. (2023). Effect of copper addition on aluminum matrix composite by powder metallurgy method. AIP Conference Proceedings . 2630, 040003. doi.org/10.1063/5.0126201.

[4] Flávia R. B., Francisco R. C. Francisco R.C., Markssuel T. M. , Sergio N. M. , Fabio d. C, Afonso R. G.(2023). A Review of the Use of Coconut Fiber in Cement Composites. Polymers 15(5) : 1309. doi.org/10.3390/polym15051309

[5] Muhammad M. A., Omid H., Aliriza R. (2023). A sustainable cementitious composite reinforced with natural fibers: An experimental and numerical study. Construction and Building Materials. 378 : 131093. doi.org/10.1016/j.conbuildmat.2023.131093.

[6] Jack A. C., Muhammad A., Brett M. (2023). Effects of Fiber Moisture Content on the Mechanical Properties of Jute Reinforced Compressed Earth Composites. Construction and Building Materials. 373 : 130848. doi.org/10.1016/j. conbuildmat.2023.130848

[7] Liping H., Fan X., Junchaw Z. (2022). Optimization of molding process parameters for enhancing mechanical properties of jute fiber reinforced composites. Journal of Reinforced Plastics and Composites. 42(9) : 1099. doi.org/ 10.1177/07316844221130487

[8] Arnas M., Flavio S., Andrio F. Monica V., Giminiano M., Enzo M. (2023). Jute fiber-reinforced mortars: mechanical response and thermal performance. Journal of Building Engineering. 66 : 105888. doi.org/10.1016/j.jobe.2023.105888.

[9] Muhammad A. K. et al. (2023). Effect of Nano-Clay and Jute Varieties on the Structural, Mechanical, and Thermal Properties of Polyester Composite. 20(1) : 3-5. doi.org/10.1080/15440478.2023.2179155

Journal of University of Anbar for Pure Science

Investment Jute Fiber as Environmental Waste to Reinforcement Polyester Resin, Epoxy Resin and its Mixtures Used in home applications

References

References

Volume 17, Issue 2 - Issue Serial Number 2
December 2023
Page 190-195

Investment Jute Fiber as Environmental Waste to Reinforcement Polyester Resin, Epoxy Resin and its Mixtures Used in home applications

References

References

Volume 17, Issue 2 - Issue Serial Number 2December 2023Page 190-195

Volume 17, Issue 2 - Issue Serial Number 2
December 2023
Page 190-195